23-04-2021

Ni Offers New Daq And Gpib Drivers For Mac



  1. Ni Offers New Daq And Gpib Drivers For Mac Os
  2. Ni Offers New Daq And Gpib Drivers For Mac Computers
Ni offers new daq and gpib drivers for mac os

Home > Hardware > ... > Data Acquisition – DAQ > Data Acquisition Options and Accessories > Details

NI myDAQ Driver Before you can start using your NI myDAQ, you need to install the required software from the NI myDAQ Software Suite DVD (included in your box). Simply insert the DVD in your computer and follow the on-screen instructions. I performed a fresh installation of LabVIEW 2018 and NI-DAQ Base 15.0 plus the NI-DAQmx Base for LabVIEW 2017 additions, using the shell script in Terminal with the script modified to replace 2017 with 2018. I also installed NI-VISA18.0.0, and for good measure NI-488.2 18.0 even though I'm not using GPIB. My hardware is a USB-6218. A second Found New Hardware Wizard will follow, step through the second wizard in the same way; 4. Connect the USB/GPIB converter to your instrument. Turn the instrument on and ensure that it is configured to use GPIB. For NI software to recognize Keysight hardware, you must enable the NI-VISA Passport for Tulip.

When using NI LabVIEW, it is not always necessary to install NI-VISA. This greatly simplifies using the 82357A in this environment. The following steps will get your system configured:

  1. NI VeriStand 2010 or later (Full Development for real-time deployment) LabVIEW Real-Time 2010 or later (real-time deployment) NI-VISA 5.2 or later; GE cPCI-5565PIORC Reflective Memory Module Instrument Driver (Not supported by NI) To install the driver, follow the steps below: Download the driver version compatible with your LabVIEW environment.
  2. Native Instruments creates professional hardware and software for music production and DJing. Discover the Future of Sound! A vast range of virtual instruments and effects: Synths, sampled instruments, studio and creative effects, samplers, and cinematic tools.

1. Install the Keysight IO Libraries Suite (www.keysight.com/find/iosuite)

  1. Choose Typical installation

2. Connect the USB/GPIB converter to the PC

New
  1. You should see a Windows' Found New Hardware Wizard
  2. You do not need to insert a CD-ROM -- just press Next until the wizard completes
  3. A second Found New Hardware Wizard will follow, step through the second wizard in the same way

3. Connect the USB/GPIB converter to your instrument


4. Turn the instrument on and ensure that it is configured to use GPIB
You should now be able to use the 82357A connected instrument in your LabVIEW program.

If you do need NI-VISA installed (e.g. you need PXI support), there are some extra configuration steps that you need to perform:

1. Install NI-VISA (version 3.6 or later)

  1. If Keysight IO Libraries Suite is already installed, it will automatically go to side-by-side mode. You can skip to step 3 below.
Offers

2. Install the Keysight IO Libraries Suite

  1. Choose Typical installation, which will detect NI-VISA and default to side-by-side mode
  2. Or the Custom installation and specify side-by-side mode

Ni Offers New Daq And Gpib Drivers For Mac Os

3. Connect the USB/GPIB converter to the PC

  1. You should see a Windows' Found New Hardware Wizard
  2. You do not need to insert a CD-ROM -- just press Next until the wizard completes
  3. A second Found New Hardware Wizard will follow, step through the second wizard in the same way

4. Connect the USB/GPIB converter to your instrument


5. Turn the instrument on and ensure that it is configured to use GPIB

Ni Offers New Daq And Gpib Drivers For Mac Computers


6. For NI software to recognize Keysight hardware, you must enable the NI-VISA Passport for Tulip.

This is a software module included with NI-VISA for support of Keysight hardware, and is not enabled by default.

  1. Use the NI Measurement and Automation Explorer (NI MAX) to enable the Passport for Tulip; in version 3.1 and greater of NI MAX, click on Tools > NI-VISA > VISA Options…
  2. Select the Passport for Tulip check box
  3. Click Save to save your settings, then exit NI MAX

7. Close and restart NI MAX. You should see your instrument listed under 'Devices and Interfaces' as a Miscellaneous VISA Resource.


8. The Keysight USB/GPIB Interface Converter should now be accessible from NI-VISA and from NI utilities such as VISA Interactive Control (VISAIC)

For more information, go to the Keysight IO Libraries Suite help topic: “Using Keysight’s and Other Vendors’ Products Together”.

For more information about GPIB / USB control product, please visit GPIB / USB Instrument Control Products.

Related Links